The ProView II scope includes three dot-and-crosshair reticles designed for shooting at 20, 30 and 40 yards. That said, I have tested all designs of nocks in all models of crossbows and have not experienced any problems with function or accuracy, but manufacturer warnings are there for a reason and should not be ignored.Ī trip to the range showed the Titan SS to be dead on at 20 yards, as promised. Even if the vane is slightly misaligned when loading an arrow, the Omni-Nock will self-correct to proper alignment as acceleration begins.” On today’s narrower crossbows with acute string angles the Omni-Nock also keeps the bowstring from traveling over or under the arrows. These channels eliminate the indexing problem associated with moon and capture nocks. According to TenPoint, “the Omni-Nock design features six micro-grooves that form three string alignment channels in the nock. Using flat, moon or capture nocks will void the warranty on the crossbow. Not every crossbow manufacturer provides a pre-mounted scope that is specifically designed for crossbow shooting - but they should!Īn update about nocks: Any TenPoint, Wicked Ridge or Horton crossbow manufactured after 2013 requires the use of Omni-Nock arrows. On manufacturer-sponsored hunts I have seen a truckload of crossbows assembled and sighted in after arriving at camp and in every case the crossbows required no more than a click or two of adjustment. A click or two of elevation or windage is all that’s required to get any TenPoint, Wicked Ridge (and now) Horton crossbow shooting dead center at that distance. At 20 yards the first arrow usually lands within an inch or two of the bull’s-eye. I have been to the company’s Mogadore factory and have observed the scope mounting and pre-sighting process and can vouch for its accuracy. The Titan SS comes with a ProView II illuminated 3X scope pre-installed, a feature that has been standard at TenPoint for several years. It’s worth investing a few extra minutes to ensure that the job is done right. Proper assembly is mandatory for dependable functioning of the crossbow and for accurate shooting. Total assembly time, including reading the owner’s manual and other information was less than 30 minutes. Once assembled correctly, your crossbow is pre-sighted for 20 yards.”Īll necessary assembly tools are included except for a small Phillips-head screwdriver, which is required to attach the Quick Disconnect male attachment to the quiver mount. Basically, you only have to bolt the bow assembly to the stock assembly, install the foot stirrup and you are ready to shoot. The owner’s manual is clear and concise: “The Titan SS is easy to assemble. It features arrow speeds up to 340 fps.Īlthough the Titan SS is one of the easiest of all crossbows to assemble, cock and shoot, new users are advised to read the owner’s manual and all accompanying warnings and cautions prior to assembly. With a power stroke of 12½ inches the Titan SS is easy to cock from a sitting position on the ground or in a blind or stand, even a climber. With an 18½-inch axle-to-axle width the Titan SS is easy to manipulate through brush or within the confines of a blind or stand. Promoted as the lightest, shortest and fastest version of the Titan crossbow line, the Titan SS weighs 6.7 pounds and is compact at just 35 inches. ![]() ![]() Whitetail hunters looking for a solid, sturdy, accurate and user-friendly crossbow will be more than pleased with TenPoint’s Titan SS model.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |